Changing the Visibility of Luminaire Photometric Webs

The Visibility-Photometric Web commands selectively switch luminaire photometric webs on or off as to change their visibility. Only existing photometric webs are affected by this command, newly located luminaires will have their photometric webs displayed only if this option is enabled in Photometric Web Specification dialog.

Note: This command is not undoable.

  1. From the Modify menu choose Luminaire - Photometric Webs - Toggle On/Off, Switch- All On or All Off or All On Same Label or All Off Same Label , or from the Luminaire toolbar select image\template_button.jpg. The default option is Toggle On/Off.
  2. Select the luminaires whose photometric webs you wish to make visible. Multiple luminaires may be selected at once.
  3. Right click to confirm your selection and display the luminaire photometric webs.
  4. To change the visibility of luminaire photometric webs in their entirety or by label, left click on the pull-down arrow to the right of the button to invoke the secondary menu. Select Visibility - All On, All Off, All On Same Label or All Off Same Label.

Note: Luminaire locations may have their photometric webs made visible or invisible singularly or collectively from Project Manager.