Roadway Optimizer - Print Layouts
This dialog allows you to select which layouts and/or layout comparison to print. Blank layouts will appear grayed out in the dialog. Similarly, the Layout Comparison is only available if two or more layouts have been created.
- Select the layouts to print by clicking in the selection box adjacent to the layout name. A checkmark will appear in the box when it is enabled. Clear the selection box in order not to print the selected layout. Only layouts that have been calculated will be available for selection.
- To include the displayed banner as part of the input, click in the Include Banner selection box so that a check mark is shown. You may change the Banner by clicking the Banner button.
- Also included by default: General / Luminaire Locations:This page echoes the input criteria and luminaire definition information. If you do not wish to include this information, go to the Settings dialog and uncheck these items.
- If you wish to include the information on the Comparison tab, leave the Comparison box checked (it is checked by default).
- Specify a printer by clicking on the Print Setup button.
- Click Ok to print the selected items and return to Roadway Optimizer.
Note: Before printing, you should open the Settings dialog to see what is checked. By default, all calculation metrics are checked. The Print command will result in all metrics that are checked and have been calculated to be printed for any layouts that are selected in the Print command.