The Re-Orient command changes the orientation of a single luminaire, arrangement or group without changing the tilt. Luminaires that have aiming vectors (located with Locate and Aim) are re-oriented with a static aiming vector, tilt remains constant.
- From the Modify menu select
Luminaire - Re-Orient. or from the Luminaire Toolkit select
.
- Select the luminaire to Re-Orient.
- Drag the cursor to the new orientation point and left click.
- Continue Re-Orienting luminaires or right click (ENTER) to complete the command.
During the Re-Orient command, the luminaire's Tilt, Roll and Spin may be changed dynamically by using keystrokes. Prior to completing the command, these keystrokes are available:
- To adjust Tilt: Alt+Up/Down arrow keys to increment/decrement the Tilt angle.
- To adjust Roll: Alt+Left/Right arrow keys to increment/decrement the Roll angle.
- To adjust Spin: Alt+Shift+Left/Right arrow keys to increment/decrement the Spin angle.
- Alt+0 (zero) resets Tilt, Roll and Spin to zero.
- Notes:
- The amount of increment/decrement is determined by the Snap value (e.g., if Snap value = 2.5, the angular increment is 2.5 degrees).
- While Re-Orienting the luminaire, MH, Orient, Tilt, Roll, Spin and Aim Z are updated in the Luminaire Toolkit and on the Command Line. Once the luminaire has been Re-Oriented, the values revert back to the previous default settings.
- The dynamic keystrokes for Roll and Spin will have no effect on luminaire Groups.