Move and Re-Orient a Single Luminaire

This command allows you to Move a single luminaire and then Re-orient it, rather than using the Move command and then the Re-orient command. The luminaire will maintain its original Tilt, Roll and/or Spin angles.

  1. From the Modify menu select Luminaire - Move and Re-Orient, or from the Luminaire Toolkit select image\luminaire_move_button.jpg.
  2. Select the luminaire to move.
  3. Select the point to move from (the base point) with the mouse. (If using relative coordinates, skip this step.)
  4. Move the cursor to the new location point and left click, or type in the X,Y,Z coordinates and press Enter.
  5. Move the cursor to the new Orient angle (position of cursor relative to luminaire is shown below the Command Line), or type the new angle and press Enter.