The Bulk Luminaire Modifications command provides a method for luminaire modifications that affect every luminaire currently within the Edit Luminaires dialog box , just the highlighted luminaires, or just the selected luminaire type. This command provides an alternative to changing every cell manually (i.e., for a constant mounting height modification). Only one type of modification can be applied at any one time: General, Location, Aiming Angles or Aiming Points. However, the user can return to the Bulk Luminaire Modifications dialog at any time and make additional modifications.
You may apply a bulk modification to a selected luminaire type even though multiple luminaire types are currently selected. For instance, this selection mode allows you to change the mounting height of all type A’s in one step without affecting the mounting height of type B’s.
Finally, if you highlight two or more luminaires in the Edit Luminaires dialog and then click Bulk Modifications, you may choose to modify only the selected (highlighted) luminaires.
- From the Edit Luminaires dialog
box, select
. - Select the radio button to apply the modifications to: All Loaded Luminaires, meaning every luminaire currently shown in the Edit Luminaires dialog; to All Luminaires of Label (and then select the Label); or to Selected Luminaires Only (those highlighted in the Edit Luminaires dialog).
- Select the radio button adjacent to the type of modification: General, Location, Aiming Angles or Aiming Points.
- Select the modification option(s) and, if necessary, enter the appropriate numeric value(s).
- Click Ok.